Username: Password:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - cryptosticks

Pages: [1] 2 3 ... 12
Beginners & Help / Re: Are *all* Resellers in the List?
« on: September 17, 2019, 04:28:26 AM »
Yes.  Beware.  There are definitely scammers around.

Best to refer to the official reseller list that Aitor shared.

Unverified Sales / ** IMPORTANT: official escrow BTC address **
« on: March 13, 2019, 10:32:23 PM »

The only wallet address that should be used to is


If you are asked to send BTC to another address you are not talking to me.

GUNBOT General Discussion / Re: Banned from Gunthy Elite telegram Group
« on: November 18, 2018, 07:29:58 AM »
PM me on Telegram.

Likely the Gunthy Elite invite like changed (& Swordfish didnít have the new invite link).

Marketplace / Re: URGENT - WTS GUNBOT - RT - UTLIMATE EDITION 0.11BTC only
« on: September 16, 2018, 11:46:51 AM »
Replied to verify Iím the same Cryptosticks in the Telegram chat.

To stop fraud all GunBot license transfers MUST use escrow.

Escrow is a 3rd party to ensure safe transfer of the license.

It is not possible to purchase a GunBot from someone without using escrow.

Don't get scammed by a seller who says they don't need escrow.

When you buy a GunBot you will need to have your exchange's API keys entered into the GunBot license server.   

The seller's API key needs to be deleted from the license server; the buyer's API key needs to be added to the license server.
Only GunBot resellers and Gunthar have access to the license server.

GUNBOT General Discussion / Re: Binance API key change
« on: July 14, 2018, 04:59:22 AM »
The master key lets you have one main API key that acts as your license.  You can also have unlimited SLAVE API keys (but they have to be in the same account as your MASTER!  You canít have slave keys for your buddy or neighbor; only have SLAVES on the same account as MASTER).

Slave keys let you have more GunBot instances running (each on their unique API key).  You donít need to let us know about your slave keys: the GunBot license server verifies your master key.


If I did the escrow then I am the reseller for tech support issues.  Please contact me on Telegram.

GUNBOT General Discussion / Re: Binance API key change
« on: July 08, 2018, 04:36:30 PM »
Contact your reseller to reset your Binance API.

Technical Support & Development / Re: Gunbot NEVER trades
« on: June 01, 2018, 03:46:17 AM »
No.  That's definitely not the right channel.

Need to use the Telegram client.  There are two channels: theBotFather (public channel) and Gunthy Elite (registered GunBot owners).

You should contact your reseller for an invite.

Technical Support & Development / Re: Gunbot NEVER trades
« on: May 31, 2018, 12:40:20 AM »
Did you customize (rename or add) any strategies?  That can cause issues.

Iíd recommend three things:

1) increase your SMAPERIOD slightly
2) get on Telegram chat in official GunBot channels
3) re-download and reinstall (into a new folder)

Technical Support & Development / Re: Gunbot NEVER trades
« on: May 30, 2018, 02:47:03 AM »
Yeah, you can try providing your config.  Remove the API key and secret.

But I'd recommend you talk to your reseller and/or get on the Telegram support channels.  Ask your reseller for an invite to the Telegram chat(s).

Technical Support & Development / Re: Gunbot NEVER trades
« on: May 30, 2018, 12:13:01 AM »
A month?!  Yes.  Thatís unusual.

Have you checked your strategies to visually verify you have both BUY_ENABLED: true, SELL_ENABLED: true?

Also, make sure you look at your logfiles on disk.  There may be clues to what has happened.

Technical Support & Development / Re: Gunbot NEVER trades
« on: May 29, 2018, 03:43:24 AM »
Maybe no trading opportunities available?  The market hasn't given a lot of opportunities to buy (and even fewer to sell for profit) in the last few days.

The GunBot wasn't able to retrieve the BOUGHT_PRICE from the API.   Normally GunBot can retrieve it automatically via a simple API call.

No BOUGHT_PRICE means the GunBot can't decide when to sell for profit.

Some of the reasons why it can't be retrieved are:

* Old coins, after 30 days Bittrex stops handing out the BOUGHT_PRICE via the API.  Other exchanges have other time limits.

* Coins that were TRANSFERRED into the exchange NOT bought at the exchange.  i.e. if you sent some ETH or BTC into the exchange the API won't send you a BOUGHT_PRICE because you didn't buy it.  The exchange has no idea what the BOUGHT_PRICE is for what you sent to your exchange wallet.

Anyway, two easy ways to resolve the issue:

1) do a quick BUY and SELL (small amount) on the exchange and GunBot can then retreive the BOUGHT_PRICE

2) add a BOUGHT_PRICE override to the config.  But if you do this it is strongly recommended you also add BUY_ENABLED: false,  to stop problems.  Remember to REMOVE the BOUGHT_PRICE override once the pair has sold.

Yes.  Quite a few people trade ETH-pairs.  ETH pairs usually have less volatility which means less opportunities ... but it is still profitable.

Remember to NOT trade:

BTC-ALT coin and ETH-ALT coin at the same time, on the same exchange wallet.  Or GunBot may get confused and sell at an inopportune (bad) time.

Also donít trade BTC-ETH and ETH-ALT coin at the same time, on the same wallet.

GUNBOT General Discussion / Re: Can I use GunBot on Binance?
« on: May 06, 2018, 01:30:52 AM »
Please make a new thread instead of adding on to this one.

How do you calculate your required load of BNB that you must carry? Do you just manually top that up or can GunBot maintain a BNB account of a set level? Yes NOOB question I know.

Beginners & Help / Re: please help! bot wont buy rarely sells.
« on: May 04, 2018, 11:38:13 AM »
Iíve updated my post.  I changed the graphic.

1) <SNIP> out the repetitive 200 lines of your text.  That was an excessive amount. 
2) Turn off your GunBot for 15-30 minutes.  Maybe you've been temp banned.  Increase your BOT_DELAY.
3) Check your pairs.  Make sure they are still all valid pairs on your exchange.  Sometimes pairs are removed.
4) Re-Download and Re-install into new folder (in case your permissions were borked).


NOTE: Threads that haven't been verified within 2 months will be locked and archived.

Want to sell your GunBot?

After you have included all of the information below in your WTS listing please contact Cryptosticks or @GrumpyKitty with:

1)  Your licensed API key(s) of your GunBot

I will then verify your API key and move to the VERIFIED SALES area only if the following is included in the WTS listing:

   Buyers will feel safer when they know they will be protected by

  How many exchanges?  Any add-ons?  TradingView Plug-in?  ZENO GUI?

   Buyer paying escrow fee?  Or will seller pay?   I suggest the seller offer to pay the Escrow Fee.
   NOTE:  My fee is 7.5% of the total sale amount plus 0.0007 BTC to send final payment to seller.

   To activate the new buyer's API key someone must pay the 0.01 BTC swap fee.
   The API swap fee is not optional!  Every escrow must have an API swap fee paid.

   Even with the new GunBot system the fee must be paid.  The Gunthy wallet address must be swapped in the licensing server and the Buyer will need tech support.  The 0.01 fee is not optional.

   NOTE: For the 0.01 BTC swap fee the buyer can swap exchanges.
   i.e. the buyer can change from the seller's exchange to any other exchange!
   This should make it easier to sell your license.  The buyer can GunBot on any exchange.

   Only one API swap fee of 0.01 must be paid.  Even if you are selling multiple exchange license.
   One fee no matter how many licenses are being sold.

Click below for the GunBot Escrow explainer video --

NOTE: The above are my requirements.
Comments or concerns can be addressed to myself or to the GunBot Support Team:
NarKotix or exquitas

Technical Support & Development / Re: Not Updated, Not working
« on: May 02, 2018, 01:30:20 AM »

Glad to hear you got it working.

I think the official statement is to only replace the executable NOT dB.sqlite

But if itís working for you thatís all that matters!

Beginners & Help / Re: please help! bot wont buy rarely sells.
« on: May 02, 2018, 01:27:11 AM »
Cryptopia might be part of the problem.  They have horrible API support and Iíve given up on them.

One thing to try, if you havenít already, is to manually
Make a small buy and sell on a trading pair.  Then, perhaps, GunBot will see the trades via the API and start trading automatically.

Each exchangeís API is slightly different and needs to be massaged a bit.

Pages: [1] 2 3 ... 12