Username: Password:

Author Topic: Gunbot 3.2 - Core edition: Windows(no GUI)/Linux/MacOs/armv6/armv7 - Release nam  (Read 2511 times)

Online Gunthar

  • Administrator
  • Trust: (+1)
  • Junior Member
  • *****
  • Posts: 290
    • View Profile
  • Telegram: @GuntharDeNiro
Gunbot 3.2 - Core edition: Windows(no GUI)/Linux/MacOs/armv6/armv7 - Release name "Portugal"

    This is the core edition of the v3.2- all os/cpu are supported headless without GUI. This release is a great improvement on algo and strategies: all reported bugs of v3.1 has been fixed/improved. Thanks to all contributors of https://gunthy.org

Changelogs:

-Increasing the power of BB strategy with the following algo: StepGain, Gain, PingPong. You can now mix the 4 strategies as you wish on the 3 supported markets: Bittrex, Kraken, Poloniex.

Here are the possible algo you can use:
Pure BB: the BB formula has been improved, it now shows good values and it is not
consuming the amount of CPU it used in v3.1. I suggest to start with 30 lowBB and
30 highBB values and then tune them on the fly for each coin. You can restart the
bot whenever you want: it will remember the BB. To use this strategy set
BUY_STRATEGY: 'BB' and SELL_STRATEGY: 'BB' in your config files.
Pure STEPGAIN: BUY_STRATEGY: 'STEPGAIN' and SELL_STRATEGY: 'STEPGAIN' in your config files, will give you the power to explore up and down until the bot finds the best price to buy and the highest price to sell (supergun trend watchdog applies with improved algo). All of this on all 3 markets: Bittrex, Kraken, Poloniex. We have now 2 levels of BUY and 2 levels of SELL only in config files, since the third has not been really useful. Set BUYLVL and SELLLVL to the right level you want to use. Example: if you have BUYLVL1 to 3 and BUYLVL2 to 5, set BUYLVL to 2 if you want to explore from to 5%to infinite, or set BUYLVL to 1 if you want to explore from 3% to infinite.
Pure GAIN: BUY_STRATEGY: 'GAIN' and SELL_STRATEGY: 'GAIN' in yoru config files will give you the power to explore from BUY_LEVEL % to infinite and from GAIN % to infinite. For example: if you set BUY_LEVEL to 3 and GAIN to 5, it will buy at 3% or more (supergun trend watchdog applies) and it will sell at 5% or more (again supergun trend watchdog applies). All of this in all markets: Bittrex, Kraken, Poloniex.
Pure PINGPONG: set a price to buy and a price to sell in PINGPONG_BUY and PINGPONG_SELL config values and your bot will continuosly buy at PINGPONG_BUY price or lower and sell at PINGPONG_SELL or higher. Supergun trend watchdog applies and this strategy is available in all markets: Bittrex, Kraken, Poloniex
Any MIX of above strategies: you can set BUY_STRATEGY and SELL_STRATEGY values to any mix you want. For example you can buy with BB and sell with PINGPONG, or you can buy with PINGPONG and sell with GAIN, or BUY with STEPGAIN and sell with GAIN, and so on. Any mix you use, supergun trend watchdog will always help you to get a lower price to buy and an higher price to sell of what you put in configs: all of this on all markets, Bittrex, Poloniex, Kraken.

Bugs fixed and improvements:

All reported bugs at https://gunthy.org and in the Telgram group, have been refactored and fixed, especially the following:
-CPU and RAM leak on BB
-Fixed BB formula and reverted back to 2 as multiplier
-Fixed supergun trend watchdog not switching: we have now a separated MAX_LATEST_PRICES (which is used for BB) and MAX_LATEST_PRICES_TREND (which is used for supergun. I suggest to use 300 prices for BB and 30 prices for supergun trend.
-There is now a config file which can be used to change values for ALL PAIRS: for example, you want to change the BOT_ON_FAIL_DELAY for all pairs but you dont want to open all config files > open ALLPAIRS-params.js and set it like this:
Code: [Select]
var config = {
BOT_ON_FAIL_DELAY:(1000)*5
};

module.exports = config;

then save the file and all your pairs will change that value on the fly. You can put in the ALLPAIRS-params.js any value that is included in the traditional config file, so you are allowed to change any value you want at once.

-Fixed DASH and GNO pairs on Kraken
-Fixed deleting old BUY orders from order book
-Fixed BUY of tiny amounts
-Fixed email alerts: it now works again
-Code cleanup and refactoring of outputs: the save.json file outputs all variables every X seconds you put in bot delay time. With this feature you can build your own plugin, GUI, app based on yoru gunbot.
-Introducing dynamic reading

How to migrate from 3.1 to 3.2

1.- Move all your save.json files from the 3.1 folder to the new 3.2 folder
2.- Start your bot

How to start 3.2
This version is packaged: you dont need to install anything, it is all there. No node.js, no .NET, anything: the bot knows what to do.

Windows: your GUI will come in the next days, i know a lot of you are already using it with no GUI so here to you
Code: [Select]
gunthy.exe BTC_ETH poloniex
gunthy.exe BTC_ETH kraken
gunthy.exe BTC_ETH bittrex

Linux: chmod +x this file > gunthy-linux and then run it like this
Code: [Select]
./gunthy-linux BTC_ETH poloniex
./gunthy-linux BTC_ETH kraken
./gunthy-linux BTC_ETH bittrex

MacOs and Arm: i have built on those CPU the gunthy-mac and gunthy-arm files to start like Linux
CONFIG FILES
We have now a separated config file for each market and a params file you can use to change any value you want in all pairs, as described above. Here are the config files names:

Code: [Select]
poloniex-BTC_ETH-config.js
kraken-BTC_ETH-config.js
bittrex-BTC_ETH-config.js
ALLPAIRS-params.js

In ALLPAIRS file you can move any value you want directly from config.js files. Simply copy/paste those values from config.js file to ALLPAIRS and save ALLPAIRS. All your bots will reload values yu cahnged/added to ALLPAIRS.

Here are the values in config and a brief explanation:

Code: [Select]
var config = {
//  DEBUG
DEBUG_LOG:true,
I_REALLY_WANT_IT:false,
BUY_SMALL_PORTION:1,
INSUFFICIENT_FUNDS_ON_SELL_FIX: 0.0005,
INSUFFICIENT_FUNDS_ON_BUY_FIX: 0.0005,


//-----------------------------------------------
//   STARTUP OPTIONS
//-----------------------------------------------

SELL_ON_START:false,
CANCEL_SELL_ORDERS_ON_START:false,
CANCEL_BUY_ORDERS_ON_START:false,
CANCEL_OPEN_ORDERS_ON_START:false,



MAX_LATEST_PRICES: 200,// limit of latest prices to analyze to determine if price is growing or falling
MAX_LATEST_DIRECTIONS:30,// limit of latest  price directions ,used in supergun detection
MAX_LAST_ORDERS:5,  // keeping last orders bought
PERIOD: 15,   // candlestick period

SAVEFILE_SUFFIX: '-save.json',
//-----------------------------------------------
//  PRIMARY SETTINGS
//-----------------------------------------------
DEFAULT_MARKET_NAME:"poloniex",
DEFAULT_CURRENCY_PAIR:"BTC_ETH",   //  single pair format for all markets !
BUYLVL1: 3, //buy when the price drops by this percentual or lower if BUYLVL is 1
BUYLVL2: 12, //buy when the price drops by this percentual or lower if BUYLVL is 2
SELLLVL1: 2, //sell when the price drops by this percentual or higher is SELLLVL is 1
SELLLVL2: 70, //sell when the price drops by this percentual or higher is SELLLVL is 2
BUYLVL: 2, //possible values 1 and 2 (if you want to buy at level 1 or level 2)
SELLLVL: 2, //possible values 1 and 2 (if you want to sell at level 1 or level 2)
BUY_STRATEGY: "BB", // accepted values BB or STEPGAIN or GAIN or PINGPONG
SELL_STRATEGY: "GAIN", // accepted values BB or STEPGAIN or GAIN or PINGPONG
LOW_BB: 5, //buy when the price is higher than low BB by this percentual
HIGH_BB: 5, //sell when the price is lower than high BB by this percentual
PINGPONG_BUY: 0.001, //price to buy (or lower) in the ping pong strategy
PINGPONG_SELL: 0.002, //price to sell (or higher) in the ping pong strategy
BUY_LEVEL: 0.1, // If GAIN buy strategy is used, buy at this percentual below lower ema value
GAIN: 0.1, // If GAIN sell strategy is used, sell at this percentual above bought price
BTC_TRADING_LIMIT: 0.01,// max amount of BTC balance to use for each pair
SECURITY_MARGIN: 60, // sell all balance if currency decreases x% after you bought it
MIN_VOLUME_TO_BUY: 0.0005,  // bitrex min volume

//---BITTREX
BITTREX_KEY:'',
BITTREX_SECRET:'',

BITTREX_PRICE_METHOD:'ohlc',// ohlc OR vwa  "price to buy" definition method
BITTREX_VWA_1_INTERVAL: 10,// weighted average interval in minutes
BITTREX_VWA_2_INTERVAL: 120,// weighted average interval in minutes


//---KRAKEN
KRAKEN_ASSET_PAIR:'XETHXXBT',

KRAKEN_KEY: '',
KRAKEN_SECRET: '',


KRAKEN_PRICE_METHOD:'vwa',// ohlc OR vwa  "price to buy" definition method
KRAKEN_VWA_1_INTERVAL: 1,// weighted average interval in minutes
KRAKEN_VWA_2_INTERVAL: 15,// weighted average interval in minutes

//---POLONIEX
POLONIEX_KEY: '',
POLONIEX_SECRET: '',


POLONIEX_PRICE_METHOD:'vwa',// ohlc OR vwa  "price to buy" definition method
POLONIEX_VWA_1_INTERVAL: 0.02,// weighted average interval in hours
POLONIEX_VWA_2_INTERVAL: 0.04,// weighted average interval in hours


 
 
//-----------------------------------------------
//   BOT TIMINGS
//-----------------------------------------------
API_CALLS_DELAY:777,
BOT_SLEEP_DELAY:(1000)*10,// bot cycle delay (koef*sec)
BOT_MAX_LIFETIME:999999999,// overall bot lifetime(koef*min),
BOT_ON_FAIL_DELAY:(1000)*5, // bot repeat cycle delay if previous cycle failed  (koef*sec)
//-----------------------------------------------
// EMAIL
//-----------------------------------------------
ALERT_ON_NO_FUNDS:false,  // email on insufficcient funds
SMTP_EMAIL: '%40@gmail.com',
ALERT_EMAIL:'********',
SMTP_PASSWORD: '**********',
SMTP: true,
SMTP_PROTOCOL: 'SMTPS',
SMTP_HOST: 'smtp.gmail.com',

//-----------------------------------------------
//  OUTPUT
//-----------------------------------------------
MAX_LATEST_PRICES_SHOWN: 0, // limit of latest prices to show in console.log
SHOW_LASTEST_DIRECTIONS:false,  // show chart in console
MAX_LATEST_DIRECTIONS_SHOWN:0, // chart height
LASTEST_DIRECTIONS_LIST_WIDTH:0, // chart width

//-----------------------------------------------
//   OTHER (might be deprecated/not in use)
//-----------------------------------------------
BTC_BALANCE: 2// btc balance for test purposes,
};
 
module.exports = config;
This is all folks (for now). Keep reporting everything you notice and/or improvements because, as you can see, you are listened.
Thanks!
~Gun
« Last Edit: May 11, 2017, 11:57:38 PM by Gunthar »

Offline dobcrypto

  • Local Moderator
  • Trust: (+1)
  • Junior Member
  • ****
  • Posts: 278
  • Russian - native language
    • View Profile
Found that to start a pair, it is desirable to first clean the entire file ALLPAIRS-params.js
Telegram @dobcrypto
To get a 10% discount, tell the author a code "dobyGun"
My channel: http://www.youtube.com/dobcryptocurrency

Offline hardis1729

  • Trust: (0)
  • Novice
  • *
  • Posts: 47
  • Russian - native language
    • View Profile
Quote
Windows: your GUI will come in the next days, i know a lot of you are already using it with no GUI so here to you

Where i can learn how to RUN Gunbot on Windows without GUI?

Offline Beachguy

  • Global Moderator
  • Trust: (+1)
  • Rookie
  • *****
  • Posts: 25
  • Gunbot Reseller - pM me
    • View Profile

Linux: chmod +x this file > gunthy-linux and then run it like this
Code: [Select]
./gunthy-linux BTC_ETH poloniex
./gunthy-linux BTC_ETH kraken
./gunthy-linux BTC_ETH bittrex
~Gun

For those of you like me , mostly a  windows user and dragged into linux by Gunthar,  and struggle with linux shorthand (like we're just supposed to know these things) lol
That first command is " chmod +x gunthy-linuxx64  (or linuxx86 as case may be)  " run on the file in the directory where you installed the new bot.

and

You start the bot with ./gunthy-linuxx64 BTC_ETH poloniex or (linuxx86 as case may be).

Sometimes I think linux people do this on purpose like its some sort of secret society. LOL  8)
« Last Edit: May 12, 2017, 02:23:21 PM by Beachguy »

Online Gunthar

  • Administrator
  • Trust: (+1)
  • Junior Member
  • *****
  • Posts: 290
    • View Profile
  • Telegram: @GuntharDeNiro
Patch Fixes #2019 - v3.2_Core - all CPU
@GuntharDeNiro GuntharDeNiro released this 2 hours ago

Changelogs:

Fix buy price and sell price for stepgain. Thanks BZ!
Kraken is retrieving "average" price on market orders: moving to limit orders! Thanks ThatDerp!
Instructions: just drag and drop the excutable into your 3.2 folder and restart yoru pairs!

Please report any bug immediately.
Thanks!
~Gun

Offline grabalon

  • Trust: (0)
  • Rookie
  • *
  • Posts: 2
    • View Profile
Gunthy you should update the info here, as someone mentioned it's gunthy-linuxx64 , people _will_ get confused :)

Offline SSANTUR

  • Trust: (0)
  • Rookie
  • *
  • Posts: 3
    • View Profile
Where is the v3.2 Gui? Windows users are still waiting..

Offline leetmor

  • Trust: (0)
  • Rookie
  • *
  • Posts: 6
    • View Profile
Where is the v3.2 Gui? Windows users are still waiting..

Why do you even want a gui? Doing it via a bat file allows you to start up whatever currency pairs with whatever settings you want in one go.